a DENVER WINPUMP COMPANY
An U.S.A. Corporation
Well Seals
5" CAST IRON WELL SEAL FOR 5" ID Well Casing 5.563 OD
SIMSWSWB 5X1 1" Drop Pipe and 3/4" Conduit
SIMSWSWB 5X1-1/4 1-1/4" Drop Pipe and 3/4" Con.
SIMSWSWB 5X1-1/2" Drop Pipe and 3/4" Conduit
SIMSWSWB 5X2" Drop Pipe and 3/4" Conduit
$ 44.14 BUY ON-LINE
SIMSWSWB 5-5/8" C I WELL SEAL FOR 5-5/8" ID Well Casing 6.125" OD
SIMSWSWB 5-5/8 X 1" Drop Pipe and 3/4" Conduit
SIMSWSWB 5-5/8 1-1/4" Drop Pipe and 3/4" Conduit
$ 44.49 BUY ON-LINE
6" CAST IRON WELL SEAL FOR 6" ID Well Casing 6.625" OD
SIMSWSWB 6 X 1" Drop Pipe and 1" Conduit
SIMSWSWB 6 X 1-1/4" Drop Pipe and 1" Conduit
SIMSWSWB 6 X 1-1/2" Drop Pipe and 1" Conduit
SIMSWSWB 6 X 2" Drop Pipe and 1" Conduit
$ 45.16 BUY ON-LINE
8" CAST IRON WELL SEAL FOR 8" ID Well Casing 8.50" OD
SIMSWSWB 8 X 1" Drop Pipe and 1" Conduit
SIMSWSWB 8 X 1-1/4" Drop Pipe and 1" Conduit
SIMSWSWB 8 X 2" Drop Pipe and 1" Conduit
$ 142.00 BUY ON-LINE
SWS 2X1 2" CAST IRON WELL SEAL FOR 2" ID Well Casing 2.375" OD 1" Drop Pipe - No Conduit
$ 20.03 BUY ON-LINE
SWS 3X1 3" CAST IRON WELL SEAL FOR 3" ID Well
Casing 3.5" OD 1" Drop Pipe - No Conduit
$ 20.03 BUY ON-LINE
4" CAST IRON WELL SEAL FOR 4" ID Well Casing 4.50" OD
SWS 4X1 1" Drop Pipe and 3/4" Conduit
SWS 4X1-1/4 1-1/4" Drop Pipe and 3/4" Conduit
SWS 4X2 2" Drop Pipe and 3/4" Conduit
$ 22.50 BUY ON-LINE
4-1/2" CAST IRON WELL SEAL FOR 4-1/2" ID Well Casing
4.95" OD
SWS 4-1/2 1" Drop Pipe and 3/4" Conduit
SWS 4-1/2 1-1/4" Drop Pipe and 3/4" Conduit
$ 32.75 BUY ON-LINE
Submersible Pump
Well Seal with Bolt
Submersible Pump
Well Seal
Designed to provide a secure place to tie your polypropylene pump safety rope.
Double hole cast iron well seals are used with jet pumps to provide access for two pipes going down to a jet pump deep well ejector package. Normal configuration is to have a 1" pipe size and a 1-1/4" pipe size hole for the pipe. We stock some sizes in 1" for both holes.
Double hole well seal designation
1-1/4" x 1" = A 1" x 1" = B
4" PLASTIC WELL SEAL FOR 4" ID Well Casing 4.50" OD
40ABSA 1" Drop Pipe and 3/4" Conduit
40ABSB 1-1/4" Drop Pipe and 3/4" Conduit $ 20.25 BUY ON-LINE
Jet Pump
Well Seal
Submersible Pump
Well Seal - Plastic
Water well pumps that discharge through the top of the well, use a cast iron well seal that compresses a rubber seal inside the well casing, and around the outside of the pump discharge pipe. When ordering a well seal, remember that it fits inside the well casing, so your measurement should be the ID of the casing. The pipe size used from the pump up out of the well, is the size to order for the center hole.
The well seal is placed into the top of the casing, with the pump discharge pipe through the center. The bolts that secure the two cast iron halves together are tightened to expand the rubber seal out against the well casing inside, and against the outside of the discharge pipe. There is a opening for a 1/2" vent, and an opening for your pump wire to be routed through.
4" CAST IRON DOUBLE HOLE WELL SEAL FOR USE WITH 4" ID Well Casing 4.5" OD for jet pump deep well installation. Stocked both 1-1/4" x 1" and 1" x 1" size. Split seal.
40CIDHA 1-1/4"x1"
40CIDHB 1" x 1"
$ 22.00 BUY ON-LINE
5" CAST IRON DOUBLE HOLE WELL SEAL FOR USE WITH 5" ID Well Casing 5-563" OD for jet pump deep well installation. Stocked for 1-1/4" x 1" Split seal.
50CIDHA 1-1/4"x1" JWS5X1-1/4X1
$ 34.00 BUY ON-LINE
5-5/8" CAST IRON DOUBLE HOLE WELL SEAL FOR USE WITH 5-5/8" ID Well Casing 6.125" OD for jet pump deep well installation. Stocked for 1-1/4" x 1" Split seal.
56CIDHA 1-1/4"x1" JWS55/8X11/4X1
$ 35.75 BUY ON-LINE
6" CAST IRON DOUBLE HOLE WELL SEAL FOR USE WITH 6" ID Well Casing 6.625" OD for jet pump deep well installation. Stocked for 1-1/4" x 1" Split seal.
60CIDHA 1-1/4"x1" JWS6X1-1/4X1
$ 36.50 BUY ON-LINE
6-1/4" CAST IRON DOUBLE HOLE WELL SEAL FOR USE WITH 6-1/4" ID Well Casing 6.75" OD for jet pump deep well installation. Stocked for 1-1/4" x 1" Split seal.
62CIDHA 1-1/4"x1"
$ 36.50 BUY ON-LINE
Cast Iron Well Seals Have An Estimated Load Limit of 2500#. For Loads In Excess Of That Amount Call For Pricing On Steel Well Seals.
5" CAST IRON WELL SEAL FOR 5" ID Well Casing 5.563 OD
SWS 5X1 1" Drop Pipe and 3/4" Conduit
SWS 5X1-1/4 1-1/4" Drop Pipe and 3/4" Con.
SWS 5X1-1/2" Drop Pipe and 3/4" Conduit
SWS 5X2" Drop Pipe and 3/4" Conduit
$ 34.25 BUY ON-LINE
5-5/8" CAST IRON WELL SEAL FOR 5-5/8" ID Well Casing 6.125" OD
SWS 5-5/8 X 1" Drop Pipe and 3/4" Conduit
SWS 5-5/8 1-1/4" Drop Pipe and 3/4" Conduit
$ 38.00 BUY ON-LINE
6" CAST IRON WELL SEAL FOR 6" ID Well Casing 6.625" OD
SWS 6 X 1" Drop Pipe and 1" Conduit
SWS 6 X 1-1/4" Drop Pipe and 1" Conduit
SWS 6 X 1-1/2" Drop Pipe and 1" Conduit
SWS 6 X 2" Drop Pipe and 1" Conduit
$ 38.00 BUY ON-LINE
6-1/4" CAST IRON WELL SEAL FOR 6-1/4" ID Well Casing 6.75" OD
SWS 6-1/4 X 1" Drop Pipe and 1" Conduit
SWS 6-1/4 X 1-1/4" Drop Pipe and 1" Conduit
SWS 6-1/4 X 1-1/2" Drop Pipe and 1" Conduit
SWS 6-1/4 X 2" Drop Pipe and 1" Conduit
$ 38.00 BUY ON-LINE
6-1/2" CAST IRON WELL SEAL FOR 6-1/2" ID Well Casing
7" OD
SWS 6-1/2 X 1" Drop Pipe and 1" Conduit
$ 89.25 BUY ON-LINE
8" CAST IRON WELL SEAL FOR 8" ID Well Casing 8.50" OD
SWS 8 X 1" Drop Pipe and 1" Conduit
SWS 8 X 1-1/4" Drop Pipe and 1" Conduit
SWS 8 X 2" Drop Pipe and 1" Conduit
$ 138.00 BUY ON-LINE
10" CAST IRON WELL SEAL FOR 10" ID Well Casing
10.75" OD
SWS 10 X 2" Drop Pipe and 1" Conduit
$ 199.00 BUY ON-LINE
SIMSWSWB 3X1 3" CAST IRON WELL SEAL FOR 3" ID Well
Casing 3.5" OD 1" Drop Pipe - No Conduit
$ 27.21 BUY ON-LINE
4" CAST IRON WELL SEAL FOR 4" ID Well Casing 4.50" OD
SIMSWSWB 4X1 1" Drop Pipe and 3/4" Conduit
SIMSWSWB 4X1-1/4 1-1/4" Drop Pipe and 3/4" Conduit
SIMSWSWB 4X2 2" Drop Pipe and 3/4" Conduit (Special Order)
$ 28.38 BUY ON-LINE
4-1/4" C I WELL SEAL FOR 4-1/4" thru 4-1/2" ID Well Casing 4.95" OD
SIMSWSWB 4-1/2 1" Drop Pipe and 3/4" Conduit
SIMSWSWB 4-1/2 1-1/4" Drop Pipe and 3/4" Conduit
$ 34.00 BUY ON-LINE