a DENVER WINPUMP COMPANY

HOME             POLICIES

in-pipe heated freeze protection 

RAYCHEM  -  IN-PIPE MISER
Specifications

Raychem In-Pipe Mini heating cable is a pipe freeze protection system that heats insulated water pipes from the inside. Utilizing a heavy-duty cable that is made entirely of metal and mineral insulation, In-Pipe Mini is an energy efficient in-pipe heating cable for pipes between 14 feet (4.3 m) and 34 feet (10.4 m) in length. In-Pipe Mini includes a temperature sensor and is designed for use with 1/2 in to 1-1/4 in plastic and metal pipes that are insulated with closed-cell thermal insulation.

Utilizing a heavy-duty cable that is made entirely of metal and mineral insulation, Raychem In-Pipe Retro is a high wattage in-pipe heating cable for pipes between 40 ft and 250 ft (12.2 m and 76.2 m) in length. For 120 volts, heating cables between 40 ft and 150 ft (12.2 m and 45.7 m) include a 120 volt ground-fault protected electronic controller for easy plug-in to a standard 120 V wall outlet. For 240 volts, heating cables between 160 ft and 250 ft (48.8 m and 76.2 m) are available and include an electronic controller; 240 V heating cables must be connected to a 240 volt ground-fault protected circuit breaker. In-Pipe Retro is designed for use with 1" and 1-1/4" polyethylene pipes that are not insulated.

Raychem In-Pipe Miser is an energy efficient in-pipe heating cable designed for freeze protection of insulated plastic potable water lines. It is made with a tough mineral insulated heating cable for long life and has a cord and plug for ease of installation. For use with either 1 inch or 1-1/4 inch plastic pipe. The kit includes a ground-fault protected electronic temperature controller to comply with Pentair Thermal Management, NEC and CEC requirements for ground-fault protection of equipment. It does not protect people against the hazards of shock. Please leave these instructions with the homeowner. Note: The blue tee fitting supplied with this heating cable is designed for use with 1 inch or 1-1/4 inch ID polyethylene pipes and only for the pipe types shown below. I.D. Series 75 & 100 (PE 1404) (SIDR 9) I.D. Series 125 (PE 2306, 2406 or 3406 resin) (SIDR 11.5) I.D. Series 160 (PE 3408 resin) (SIDR 9)

WATER LINE IN-PIPE FREEZE PROTECTION

Call for pricing

RAYCHEM  -  IN-PIPE RETRO
Specifications

RAYCHEM  -  IN-PIPE MINI
Specifications