a Denver Winpump Company

​​​​HOME      VIEW YOUR CART      POLICIES

​​​PFH75B - 3/4" FNPT x 3/4" FNPT

Maximum 125 psi rated @ 125 Degrees

9-3/4"  5 MICRON 5 GPM CARTRIDGE residential water filters sand and sediment cartridges

Screen Filters

$ 5.46 Each

1-1/2” Sediment Filter Specifications:
PVC Solvent Weld Connection
Flow capacity: 10-50 GPM
Max pressure: 150 PSI
Dimensions: 15-3/8” L x 5-1/4” W
Port size: 1-1/2” slip

PFWP5 For PFH75B Housing

SINGLE CARTRIDGE WATER FILTERS


​Standard single cartridge water filters have a clear transparent sump, a black head with 3/4" female pipe threads for both inlet and discharge, and measure 5-1/8" wide x 12-1/2" high. These are adequate for a maximum of 10 gallons per minute service flow rate, and are rated for 125 psi pressure.

PFWP5-20 For PFH75B20 Housing

"A" Cartridge : PFS1-20BB 12 GPM      $ 26.41

    Nominal 20 Micron 20" Pleated Cellulose


"B" Cartridge : PFR50BB 25 GPM         $ 18.37

   Nominal 50 Micron  9-3/4" Pleated Polyester

7-1/4" x 13-1/8" FILTER HOUSING
"B"

$ 60.85 each (Housing only)

​A new  Dean Bennett Supply  website is coming !

New Look, New Features , Same Great Products & Service.

Be looking For It.

3/4 hp flint & walling submersible pumps water well pumps and related accessories

2” Sediment Filter Specifications:

PVC Solvent Weld Connection
Flow capacity: 18-100 GPM
Max pressure: 150 PSI
Dimensions: 17-7/8”L x 5-1/2”W
Port size: 2” slip

HIGH CAPACITY WATER FILTERS

These large diameter cartridge filters have an opaque blue sump with a black top. The inlet and outlet are 1-1/2" female pipe thread. Housing measures 7-1/4" x 13-5/8" long. The high capacity water filters are adequate for 25 gallons per minute maximum flow at pressure of up to 100 psi.

​HFHP75CLSWP - 3/4" FNPT x 3/4" FNPT

​Kit

Maximum 125 psi rated @ 125 Degrees

$ 116.20

​BUY ON-LINE

​​PFH75B20 - 3/4" FNPT x 3/4" FNPT

Maximum 125 psi rated @ 125 Degrees

7-1/4" X 23-3/8" FILTER HOUSING
"A"

5-1/8" X 22-3/8" FILTER HOUSING

FOR 5 MICRON 5 GPM CARTRIDGE

$ 11.77 Each

20"  5 MICRON 5 GPM CARTRIDGE

LASTS LONGER THAN STANDARD
​9-3/4" CARTRIDGES

$ 90.47 each (Housing only)

$ 32.54 each (Housing only)

1” Sediment Filter Specifications:
PVC Solvent Weld Connection
Flow capacity: 1-25 GPM
Max pressure: 150 PSI
Dimensions: 11-3/8”L x 5”W
Port size: 1” slip

$ 52.04 each
(Housing only)

SAND AND SEDIMENT REMOVAL FILTERS AND SEDIMENT CARTRIDGES

DOUBLE CARTRIDGE WATER FILTERS

These double cartridge length filters have an opaque blue sump with a black head. The head of the filter housing has 3/4" female iron pipe threaded inlet and discharge. Unit measures about 5-1/8" wide x 22-3/8" long. These are adequate for a maximum 20 gallons per minute service flow rate. Housing has a 125 psi pressure rating.

PFHD10 1" FNPT x 1" FNPT

Max. 100 psi rated @ 100 Degrees

5-1/8" X 12-1/4" FILTER HOUSING

FOR STANDARD
​5 MICRON 5 GPM CARTRIDGE

VU FLOW SCREEN FILTERS AND SAND SEPARATORS

VU FLOW SCREEN FILTERS are designed to screen out sand and sediment while water is passing through the screen in the clear plastic housing of the filter. The clear housing lets you know when it is time to purge the unit with the ball valve on the bottom. 

VU FLOW SCREENS are 100 mesh screen equal to 152 micron or .006" (6/1000) screened. All units are solvent weld for the inlet and outlet. Available 1", 1-1/2" and 2".

VU FLOW SAND SEPARATORS are equipped with a shorter, finer screen to allow more room at the bottom for sand retention, between purge times. VU FLOW SAND SEPARATORS are 250 mesh screen, equal to 61 micron or .0024" (24/10000) screened. Units are designed for 100 degree F maximum water temperature and maximum 150 psi pressure.

$ 19.53 each (Complete Kit)

​​PFHD10HFP20 1" FNPT x 1" FNPT

Max. 100 psi rated @ 100 Degree
Flow Rate Approximately 15 GPM