For 2- & 3-wire single-phase motors, 1/3 to 1.5 hp. Pumptec is a microcomputer-based pump protection device. It monitors motor load and power line conditions to provide protection against dry well conditions, waterlogged tanks, and abnormal line voltage conditions. Pumptec interrupts power to the motor whenever the load drops quickly or below a preset level. Indicator lights on the cover provide complete system status.
​Additional features
• Easily Adjustable Sensitivity Settings
• Run and Fault Indicator Lights
• Heavy Duty Relay
• Alarm Circuit Contacts
​• UL/CSA Listed

$ 210.50

Pentek Pump Protection Control Box

Most Brands

For installations up to 5 hp. The Pumptec-Plus solid state pump protection system is designed for 1/2 to 5 hp single-phase submersible pump motors. Pumptec-Plus protects against a variety of fault conditions. Run and fault lights on the cover make diagnosis quick and easy. Push button Snap ShotTM calibration makes Pumptec-Plus simple to install and an effective troubleshooting tool.
Additional features:
• Push Button Calibration
• Run and Fault Indicator Lights  
• Heavy Duty (30A) Contactor
• Works with PSC, Split-phase CSCR and CSIR motors
​• UL/CSA Listed


$ 393.00

Franklin Pumptec Pump Protection Control Box

Franklin Motors Only

PUMP Protection ​control boxes

An U.S.A. Corporation


a DENVER WINPUMP COMPANY

Textable Ordering

Protects Pumps From, Dry Well, Dead Heading, Overcurrent, Overvoltage and Undervoltage. 

The SPP-111P-3RL, SPP-233P & SPP-235P single-phase protectors include a unique microcontroller-based voltage and current-sensing circuit that constantly monitors the incoming power for fluctuations including overcurrent and undercurrent. When an abnormality, such as loss of suction, is detected,

the control deactivates its output relay and directly disconnects the pump motor. The SPP then begins its

user-selectable restart delay (dry-well recovery) timer. When the timer counts to zero or power is removed

and reapplied, the SPP reactivates its output relay and turns the pump back on. An infrared LED communicates directly with a handheld diagnostic tool called the Informer (sold separately). The Informer

displays 16 parameters including calibration point, trip point, running points, and last fault. The SPPs

are all mounted in a NEMA 3R enclosure.

Franklin Pumptec Plus Pump Protection Control Box

May Be Used On Other Brands Of Motors Including Above Ground Applications